| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| New drum sander http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=10049 |
Page 1 of 1 |
| Author: | Michael Dale Payne [ Thu Dec 28, 2006 6:16 am ] |
| Post subject: | |
Well I have broke down and decided to put the Wagner to part time duty and buy a drum sander. I think I have decided on this one 
For those that have had motor freight from Grizzly before on machinery what was the typical delivery time. I will also have to be at home when it comes as I have been told that deliveries are between 9-5. |
|
| Author: | peterm [ Thu Dec 28, 2006 6:28 am ] |
| Post subject: | |
Way to go Michael! 
Is that an 18/36? |
|
| Author: | Michael Dale Payne [ Thu Dec 28, 2006 6:39 am ] |
| Post subject: | |
yep |
|
| Author: | Rod True [ Thu Dec 28, 2006 6:43 am ] |
| Post subject: | |
Wow, they got great pricing on paper for it too. Cool Michael, I'm jealous 
|
|
| Author: | Serge Poirier [ Thu Dec 28, 2006 11:34 pm ] |
| Post subject: | |
Me too! Happy for ya Michael!
|
|
| Author: | Marc [ Thu Dec 28, 2006 11:58 pm ] |
| Post subject: | |
Looks like a nice sander, I've never seen that one, what moves vertically the table or the drum? |
|
| Author: | Michael Dale Payne [ Fri Dec 29, 2006 1:07 am ] |
| Post subject: | |
the table |
|
| Author: | JJ Donohue [ Fri Dec 29, 2006 1:57 am ] |
| Post subject: | |
Michael...I'm curious as to why you chose this one. Not at all being critical but knowing your analytical mind I am interested in what you like about this one over the Performax, etc. models. I'm considering buying one in the future and am going through similar comparisons. |
|
| Author: | Michael Dale Payne [ Fri Dec 29, 2006 2:53 am ] |
| Post subject: | |
open ended 18", HP and price and also amperage requirment |
|
| Author: | Howard Klepper [ Fri Dec 29, 2006 7:51 am ] |
| Post subject: | |
The table bears a strong resemblance to Delta's. |
|
| Author: | Michael Dale Payne [ Fri Dec 29, 2006 8:04 am ] |
| Post subject: | |
Howard it is basicly the Palmgren 81318 
|
|
| Author: | Chris Ide [ Sat Dec 30, 2006 10:39 am ] |
| Post subject: | |
Had a motor freight from griz last week, maple work bench tops, ordered on a thurs afternoon, the truck showed up on the following wed. They offered lift gate service at an additional cost when I ordered, but the heaviest top was 125lbs figured my helper and myself could handle it so didnt take them up on it. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|